Filter
Top Products
With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation can be put right
without contacting the Service Department.
,
Installation work and repairs to electrical appliances must only be carried
out by a suitably qualified and competent person in strict accordance with
current local and national safety regulations (BS 7671 in the UK). Repairs and
other work by unqualified persons could be dangerous. The manufacturer
cannot be held liable for unauthorised work.
Problem Possible cause Remedy
The hob or cooking
zones cannot be
switched on.
The system lock is
activated.
Deactivate the system lock
(see "Safety lock / System
lock").
The mains fuse has tripped. Reset the trip switch in the
mains fuse box (minimum
fuse rating - see data
plate).
There may be a technical
fault.
Disconnect the appliance
from the electricity supply
for approx. 1 minute.
– switch off at the wall
socket and withdraw the
plug, or
- switch off at the isolator,
or
–
disconnect the mains
fuse.
Reset the trip switch in the
mains fuse box, and switch
the appliance back on. If it
still will not switch on,
contact a qualified
electrician or the Miele
Service Department.
Problem solving guide
39