Programme* Status** Setting
P00Demonstration mode and
factory default settings
S 0 Demonstration mode on
(after the hob is switched on, "dE"
will appear in the timer display for
a few seconds.
S1 Demonstration mode off
S 9 Factory default settings reinstated
P02Power level range S0 9 power levels/settings
(1, 2, 3 ... to 9)
S 1 17 power levels/settings
(1, 1., 2, 2., 3 ... to 9)
If the Auto heat-up setting is
selected, an A will flash
alternately with the continued
cooking setting in the display.
P04Keypad tone when a
sensor is touched
S 0 Off
S 1 Quiet
S2 Medium
S 3 Loud
P05Audible tone for the timer S 0 Off
S 1 Quiet audible tone on for 10
seconds
S2 Medium audible tone on for 10
seconds
S 3 Loud audible tone on for 10
seconds
P06Safety lock S0 One-finger locking using $
S 1 Three-finger locking by touching
$ and the sensors for selecting
the right-hand cooking zones at
the same time
* Programme /Status numbers not shown here have no allocation.
** The factory default settings are shown in bold.
Programming
42