Filter
Top Products
Conversion to alternative types of gas
After conversion
After converting the gas cooktop to
an alternative type of gas, place the
label supplied with the jet kit on the
data plate.
Check that the burner is assembled
correctly .
Turn on the gas supply.
Check that there are no leaks.
Turn on the electrical supply.
Light each of the burners in turn:
When set at “low”, the flame should
not go out, nor should it go out when
the control knob is quickly turned
from “high” to “low”.
When set at ”high“ the gas flame
must burn with a clearly visible center.
Conversion to alternative types of gas
27