Miele km 6316 Cooktop User Manual


 
Switching on
The hob must be switched on before any of the zones can be
used.
Do not leave the appliance unattended whilst it is being
used.
To switch the hob on
^
Touch the s sensor.
0 will appear in each of the cooking zone displays. If no
further entry is made, the hob will switch itself off after a few
seconds for safety reasons.
Switching on a cooking zone, setting a power level
^ Touch the sensor for selecting the cooking zone you want.
A 0 will flash in the cooking zone display.
^ Set the power level you want by touching the relevant
number on the numerical keypad.
To set one of the intermediate settings you need to touch
the area between the numbers (see "Power level range").
The power level selected flashes in the display for a few
seconds to start with and then lights up constantly.
Altering the power level
^
Touch the sensor for selecting the cooking zone you want.
The power level will flash in the cooking zone display.
^
Set the power level you want by touching the relevant
number on the numerical keypad.
If only one of the cooking zones is in operation, you can
alter the power level without activating the cooking zone.
Operation
24