Miele KWT 1611 Vi Refrigerator User Manual


 
An alternative anti-tipping
mechanism
The appliance can alternatively be
secured with a wooden beam across
the top of the appliance. If this method
is used, then there must not be any gap
between the appliance and the wooden
beam.
The wooden beam must be at least
75 mm x 100 mm thick.
The length must be the same as the
width of the building-in niche.
If the building-in niche is deeper than
the appliance, a thicker wooden
beam should be used.
The wood must cover the appliance
to a depth of at least 50.8 mm (see
diagram).
^
Mark the position of the lower edge of
the wooden beam on the rear wall of
the building-in niche.
^
Select screws of a length depending
on the thickness of the wood.
Use the number of screws
appropriate to the niche width to
ensure that the wooden beam is
securely fixed.
^
Check where the upright wall
supports are in the back of the niche,
and mark the drill holes in the
wooden beam accordingly.
^ First, drill the holes in the wooden
beam.
^ Secure the wooden beam to the back
wall of the niche.
Installation
50