Filter
Top Products
Securing and aligning the
furniture door
^ Insert the angle trim o as far as it will
go into the spaces in the frame, as
shown.
^
Open the appliance door and hang
the furniture front on its frame onto
the threaded bolts, as shown p.
^
Press the angle trim o on both sides
into the white plastic frame, and
screw them down securely.
^
Screw the nuts q loosely onto the
threaded bolts - but do not tighten
yet.
^
Close the appliance door and check
the distance between the door and
neighbouring furniture doors.
^ Align the door to the side by sliding it
over the threaded bolts p.
^
Align the depth of the door via the
gaps in the angle trim o. Then screw
the angle trim into position.
^
Now screw on the top nuts q. The
door is now fixed.
Installation
57