Filter
Top Products
^
Align the appliance to the height of
the niche by altering the adjustable
feet using the spanner supplied.
^
Push the appliance into the niche.
When doing this, make sure that the
mains cable does not get trapped.
Make sure that the socket and on-off
switch are easily accessible after the
appliance has been pushed
underneath the worktop.
Make sure that the ventilation gap in
the plinth is at least 300 cm
2
to
ensure that air can be drawn
through without hindrance.
Otherwise the compressor will
switch in too frequently and for
longer, resulting in an increase in
electricity consumption and an
increased operating temperature
which can lead to damage to the
appliance.
Securing the appliance
^
Secure the appliance in its niche by
tightening the screws through the
fixing strip.
Installation
34