Filter
Top Products
Aligning the appliance to taller
unit doors
If adjacent furniture housing doors a
are taller than the wine conditioning unit
door, the wine conditioning unit can be
aligned to the unit doors using a filler
panel b.
A bracket is required to secure the filler
panel, which is available from the Miele
Spare Parts Department or from your
dealer.
The filler panel must be made to
measure. When cutting the filler panel
to size please take the door hinge c
into account which measures
12x45mm.
^
If the door is right hand hinged, the
bracket a should be fixed right
aligned to the back of the filler panel
b; if the door is left hand hinged,
then the bracket should be fixed left
aligned.
^ Pull the appliance as far as you need
to out of the niche so that you can tilt
it towards you.
^
Hand-screw the bracket and the filler
panel to the appliance.
^
Align the filler panel to the door of the
wine conditioning unit over the long
slots to give a flush finish.
^
Now tighten the screws.
^
Push the appliance into the niche.
Installation
35