Filter
Top Products
Dealer
Demo modes are only for
showrooms.
The dishwasher has three demo
programs for showrooms.
The programs "Demo mode" and
"Endless demo mode" show the use
and function range of the dishwasher.
–
Demo mode:
The program is started by touching a
control. It runs once and must be
started again.
–
Endless demo mode:
The program starts after it was
activated and runs in a loop until it is
turned off.
–
Demo wash sound:
The program activates the pumps to
demonstrate the wash sound.
Turning the demo mode on
^
Select the desired option and confirm
with
OK.
^
Confirm the message
Activate
demo mode?
with OK.
^
Touch any control to start the
selected demo mode.
^
To cancel the demo mode, touch any
control again and confirm with
OK.
Turning the demo mode off
^
Select
Off to deactivate the demo
mode and confirm with
OK.
^
Confirm the message
Deactivate
demo mode?
with OK.
Factory default
All settings can be reset to factory
default.
^
Confirm the message
Reset to
factory default?
with OK.
^
Confirm the information
All settings
are reset to factory default
with
OK.
Leaving the "Settings J menu"
To leave the "Settings J" touch the + C
control. The main menu shows.
Settings J
52