Miele M636EC Microwave Oven User Manual


 
Installation and electrical connection
All electrical work should be carried out
by a competent person, in accordance
with national and local safety regula-
tions.
The microwave oven is supplied with a
mains cable and plug for connection to
a single phase 230-240 V, 50 Hz a. c.
supply. The voltage, rated load and
fuse rating are given on the data plate.
Please ensure that these match the
household mains supply.
If the cable is damaged it must be
replaced by a special cable which
must be fitted by a competent per-
son trained by the manufacturer.
Please consult the Customer Ser-
vice dept.
For extra safety it is advisable to install
a residual current device (RCD) with a
trip current of 30 mA.
GB / IRL
Connection should be made via a
fused connection unit or a fused plug
and a suitable switched socket, (rated
load under 3000 W), or via suitable iso-
lator (rated load over 3000 W), which is
easily accessible.
AUS / NZ
The plug rating is 10 A.
This appliance is elecrically sup-
pressed according to
AS / NZS 4052 : 1992
Important
The wires in the mains lead are col-
oured in accordance with the following
code:
Green/yellow = earth
Blue = neutral
Brown = live
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings ident-
ifying the terminals in your plug, pro-
ceed as follows:
The wire which is coloured green and
yellow must be connected to the termi-
nal in the plug which is marked with the
letter E or by the earth symbol
z or
coloured green or green and yellow.
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black.
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter L (GB / IRL) or
A (AUS / NZ) or coloured red.
WARNING
THIS APPLIANCE MUST
BE EARTHED
Installation and electrical connection
37