Miele M 626 EC Microwave Oven User Manual


 
Operation
Combination mode - Micro-
wave with Fan Heat
(only on models M 626 EC and
M 636 EC)
Press the m touchpad and use the
+/- touchpads to set the cooking time
you require (5 seconds to 99 minutes).
Press the ü touchpad.
The symbol
h for the Microwave
mode flashes in the display and P 9
appears.
Use the +/ - touchpads to select the
power setting you require.
The
h symbol flashes and the se-
lected power setting appears.
Now press the
D
touchpad.
The set time as well as the pre-set
temperature appear in the display
area. The
D and h symbols flash.
Use the +/ - to select the tempera-
ture you require
(50 °C 250 °C).
Press the START touchpad.
The set time appears in the display
area and begins to count down in
one second steps.
A red dot also appears in the display
area (heat warning indicator).
An audible tone sounds after the
cooking time has elapsed.
Press the
ü touchpad if you wish to
call up the power setting while the ap-
pliance is in operation.
Recommendation
The turntable should always be
switched on when the Microwave with
Fan Heat mode is in use.
Combination mode - Micro-
wave with Fan Grilling
(only with models M 626 EC and
M 636 EC)
Press the m touchpad and use the
+/- touchpads to set the cooking time
you require (5 seconds to 99 minutes).
Press the ü touchpad.
The
h symbol for the Microwave
mode flashes in the display area and
P 9 appears.
Use the +/ - to select the power set-
ting you require.
The
h flashes and the selected
power setting appears.
Now press the I touchpad.
The set tiime as well as the pre-set
temperature appear in the dipslay
area. The
I and h symbols flash.
Use the +/ - touchpads to select the
temperature you require
(50 °C 200 °C).
Press the START touchpad.
The set time appears in the display
area and begins to count down in
one second steps.
A red dot also lights up in the dis-
play area (heat warning indicator).
An audible tone sounds after the
cooking time has elapsed.
Press the
ü
touchpad if you wish to
call up the power setting while the ap-
pliance is in operation.
Operation
23