Filter
Top Products
Settings Available settings (* factory default)
PI Clock display S0*
SI
If the appliance has not been used for a
longer period of time, the clock will be
hidden and continue to run in the
background. The appliance is turned off and
must be turned on before it can be used
again.
The clock is turned on and remains visible.
The appliance is ready for use.
P2 Signal tone
volume
S0
SI
to
S7*
Signal tones are turned off.
Signal tones are switched on. You can
change the volume of the tone. The tone
assigned to a status will sound when the
status is selected.
P3 Keypad tone S0
SI*
Keypad tones are turned off.
Keypad tones are turned on.
P4 Clock 24 h
12h*
The 24-hour clock display is active.
The 12-hour clock display is active.
P5 Reminder signal S0
SI*
The reminder signal is turned off.
The reminder signal sounds every 5 minutes
for a period of time after the end of the
program.
P6 Unit of weight SI
S2*
Food weight is displayed in grams (g).
Food weight is displayed in pounds (lb).
P7 Display brightness SI
to
S7,
S4*
Different levels of brightness can be set. The
brightness assigned to a status will appear
when the status is selected.
P8 Demo mode
(for presentations
in dealer
showrooms or at
trade shows)
S0*
SI
Demo mode is deactivated.
Demo mode is activated. When a button or
selector is operated, MES_ shows briefly in
the display. The appliance can be operated,
but the microwave function does not work.
P9 Keep-warm
function
S0
SI*
The keep-warm function is turned off.
The keep-warm function is switched on.
Changing settings
42