Filter
Top Products
3
3
Plug the coffee maker into the mains.
2
Ensure the On/Off Switch (10),and Steam
Control (2) are set to /Off. Select Coffee (8).
11
Fill the Water Tank (5) and place into the coffee
maker.
7
Slide and release the One (6) or Two Cup (7) Switch
to start brewing the desired amount of coffee.
6
Slide the On/Off Switch (10) to On. The
Temperature Indicator Light
(9) will stop
flashing when the coffee maker is ready.
55
Insert the Filter Holder into the Brewing Head (4)
turning anti-clockwise until it locks fully into place.
Place your cup(s) under the Coffee Dispenser (17).
4
Place the relevant Filter (14) or (15) into the Filter
Holder (16). Fill with espresso coffee and tamp
with Tamping Spoon (18), or use an E.S.E. pod.
Using your coffee maker
8
To stop or cancel the brewing process, slide
and release the switch again.
47155 rev3_Layout 1 02/09/2011 13:52 Page 3