Filter
Top Products
6
The Temperature Indicator Light (9) flashes slowly
when the boiler is heating, this is normal.
The Temperature Indicator Light will flash fast and
the coffee maker will not work when there is a
problem.
If this occurs check;
• The water tank is full and correctly installed.
• The steam control is set to off.
• Any air locks have been removed.
Please note your coffee maker has a sleep mode
to save energy. If your coffee maker is not used
for 15 minutes, your coffee maker will enter sleep
mode. The Temperature Indicator Light
(9) flashes
slowly in this mode.
To wake the machine, slide and release either the
one
(6) or two cup (7) switch.
When making espresso coffee it is important to
use the correct type of coffee grinds. Espresso
coffee is a very fine grind which is designed to
work with espresso filters. Using other types of
coffee in an espresso filter (such as filter coffee
grinds,) will result in a poorer tasting coffee and
could clog the filter.
The coffee maker is compatible with both E.S.E.
pods (a compact coffee pod with a paper filter
covering,) as well as ground espresso coffee.
When making espresso with an E.S.E. pod, use
the One Cup/ E.S.E Pod Filter
(14).
You can adjust the height of the Drip Tray to
reduce splashing when dispensing coffee into
smaller cups such as espresso cups.
Press the two Drip Tray Adjustment Buttons
(12)
to release the spring catch and raise or lower the
drip tray.
When the water in the Drip Tray is full, the Drip
Tray Level Indicator
(13) will change colour.
1
Remove the Drip Tray (11) from the appliance and
empty.
2
Clean the Grid and Drip Tray with a damp cloth
before replacing.
Temperature Indicator Light
E.S.E. Pods
Using the correct type of
coffee grinds
Adjusting the height of the
Drip Tray
Sleep mode
Emptying the Drip Tray
47155 rev3_Layout 1 02/09/2011 13:52 Page 6