Morphy Richards 47155 Coffeemaker User Manual


 
8
Troubleshooting
Water is dispensing from the
Steam Wand
Steam Control is open Rotate the Steam Control so
its closed
Problem Reason Solution
The coffee temperature is too
cold
Heater block is not hot enough
before dispensing
Before dispensing Coffee,
make sure the ready light is
illuminated
The coffee grinds are wet after
use
Coffee is not compact enough Tamp the coffee before
inserting
Espresso is weak Wrong coffee type Always use espresso coffee
grinds
Milk is not frothing Air and steam are not getting
into the milk
Use a pin to clean the Steam
Wand nozzle and air holes in
the cleaner
Coffee is too strong or weak Wrong volume of coffee Use the correct amount:
1 person - 7g (1-level Tamping
Spoon)
2 person 14g (2-level Tamping
Spoon)
Indicator light is flashing
quickly
There is not enough water in
the water tank
The Steam Control is set to
steam
Air lock in pipe
Fill the water tank
Turn the Steam Control to the
off position
Switch to dispense from Steam
Wand to remove blockage
(ensure cup is placed
underneath)
47155 rev3_Layout 1 02/09/2011 13:52 Page 8