Filter
Top Products
5
Always switch the machine off and
remove the plug from the socket
b
efore filling the water tank. Care
s
hould be taken to ensure that the
c
orrect quantity of water is placed
in the tank, as the machine always
uses all the water.
3 Close the pressure cap tightly by
turning it clockwise.
4 P
lace the washable metal filter into
the filter holder and add the desired
q
uantity of coffee to the filter using
the measuring spoon provided.
Special marks on the inside of the
filter show the correct levels for 2, 4
and 6 cups of coffee lightly
compress the coffee down. Remove
excess coffee from the edge of the
filter.
5 Position the filter holder underneath
the water outlet, push it upwards
and turn it to the right into the
locked position to fix it onto your
coffee machine
A.
Note: Push firmly to the right to lock
into position.
6 Your machine is fitted with a
strength selector which allows you
to make LIGHT to STRONG coffee.
Set the strength selector mid way
between LIGHT and STRONG for
MEDIUM strength coffee.
7 Place your glass jug with the lid on
the drip tray and directly under the
spout of the filter holder, ensuring
that the jug handle is pointing
outwards from the unit.
8 Plug the espresso coffee maker in
at hte wall socket and push the
coffee on/off switch to ‘ON’
position. The orange light will glow
to show th ecoffee maker is
working.
9 The coffee will start to flow from the
filter holder spout after about 2 or 3
minutes. Wait until all the water from
the water tank has flowed into your
glass jug and the green light glows.
10 When the filtering pr
ocess is
complete switched of
f the coffee
maker, remove the glass jug from
your cof
fee maker and pour the
coffee into your cups.
WARNING: The coffee maker and
hot plates are hot and remain hot
for some time after switching off.
11
Unplug machine and allow to cool.
Slowly remove the pressure
c
ap.
1
2
T
o remove the used coffee grounds,
remove the filter holder by turning
the handle to the left until you find
t
hat the filter holder drops down.
Flip the filter retaining clip so that it
retains the filter. Turn the filter
upside down and knock out the
g
rounds. Flip the retaining clip back
along the handle before the next
u
se.
Note: Due to the amount of steam
lost through the process, the coffee
produced will be less than the water
put in. This is accounted for in the
amount to put in.
Making a cappuccino
Prepare your machine as described
in the section ‘Making a coffee’.
Use your glass jug for measuring
the correct amount of water
needed.
Frothing milk
It is advised to start heating your
milk at the same time as heating
your coffee or several minutes
before making coffee to ensure milk
is hot.
1 Fill the stainless steel milk jug
provided with the required amount
of milk. Do not exceed the
maximum level or add less than the
minimum level.
2 Place the jug on the hot plate and
switch on
B.
NOTE: You can turn on the hot plate
at the same time as the coffee
on/off switch. It will take
approximately 5-7 minutes for the
milk to heat up to its optimum
frothing temperature.
3 Lift the milk jug up to the milk
frother blade
C. Raise the milk jug
ensuring that the cowl is just under
the surface of the milk - this will
give the maximum froth. Maintain
the milk jug in this position between
30-60 seconds.
WARNING: Take care as the milk
will be hot.
g
4
Features
⁄ Pressure cap
¤ Water tank
‹ Strength selector
› Filter
fi Filter retaining clip
fl Filter holder
‡ Drip tray metal plate
· Drip tray
‚ Hot water outlet
„ On/off/switch with power and
ready indicators
‰ Milk frother hot plate on/off
switch with indicator
 Glass coffee jug with lid
Ê Jug lid
Á Measuring spoon/tamper
Ë Milk frother jug
È Milk frother attachment
Í Milk frother on/off button
Î Steam exhaust tube
Ï Milk fr
other hot plate
OPERATING THE
APPLIANCE
Before use
Take your coffee maker out of the
box and remove the packaging.
Before using the appliance for the
first time, clean thoroughly by
operating two or three times with
the maximum volume of fresh water
(6 cups) but without using coffee.
Wash the detachable parts of the
machine in warm soapy water.
Making espresso coffee
1 Unscrew the pressure cap by
tur
ning it anti-clockwise.
2 To fill the water tank use your glass
jug to measur
e the volume of water
required. The jug is marked with the
water levels for 2 cups (minimum), 4
cups and 6 cups (maximum).
⁄
⁄
¤
¤
‹
‹
›
›
fi
fi
fl
fl
‡
‡
·
·
‚
‚
„
„
Â
Â
‰
‰
Ê
Ê
Á
Á
Ë
Ë
È
È
Í
Í
Î
Î
Ï
Ï
A
A
B
B
C
C