Filter
Top Products
16
Operation
Dishwasher Drain Operation
1. Push the dishwasher POWER switch up to the ON position.
2. The POWER switch illuminates and the machine lls with water.
3. Press and hold the green START button for 1 second. (Silver button for Model 501HT).
4. Release the START switch.
5. The dishwasher starts and the green cycle light illuminates.
6. Check the temperature gauge to conrm that it displays the correct incoming hot water
temperature. This may take several minutes for the wash tank to reach temperature.
7. When the dishwasher stops, push the POWER switch down to the OFF/DRAIN position.
8. The green cycle light illuminates as the dishwasher begins the drain cycle.
9. The green cycle light goes out when the machine has drained completely.
Note:
There is a 4 second delay after switching the machine off. The motor will start and stop 4 times
before the drain cycle is complete.