Filter
Top Products
INITIAL START-UP
17
Check Wash
Water Temperature
The wash tank heater and
the (booster tank heater, MH-60 only)
will begin to heat the water in
the dishwasher.
Wait approximately 10 minutes
for the wash tank water to
reach operating temperature.
The temperature should be a minimum
of 150°F/66°C for (MH-60, MH-6N).
The MH-6L requires a minimum of
120°F/49°C. However, a minimum of
140°F/60°C is optimum for the MH-6L.
Prescrap the dishes. Load ware into
the dishrack. Open the doors, insert the
rack into the dishwasher.
Note that the power indicator
light is illuminated.
THE POWER SWITCH IS
ON DURING INITIAL FILL.
Make sure the doors are fully closed.
Push the On/Off power
switch to the UP position.
THE DISHWASHER FILLS
AUTOMATICALLY.
NOTE:
The dishwasher will fill automatically each
time the power is turned off even if the
dishwasher is full of water.
3
4
5
INITIAL START-UP (Cont.)
WASH
EXTENDED
WASH
CYCLE
POWER
OFF
RINSE PRESSURE
WASH
EXTENDED
WASH
CYCLE
POWER
OFF
RINSE PRESSURE
WASH
EXTENDED
WASH
CYCLE
POWER
OFF
RINSE PRESSURE