Filter
Top Products
GENERAL
Model Numbers
MH-60, MH-6N, MH-6L
The MH-60 model is a high temperature
(180°F/82°C rinse) sanitizing model with
booster.
The MH-6N model is a high temperature
(180°F/82°C rinse) sanitizing model without
booster.
The MH-6L is a low temperature (Min. 120°F/
49°C-140°F/60°C Optimum) sanitizing model
for use with a sodium hypochlorite (Chlorine)
based sanitizer at a minimum concentration of
50 PPM in the final rinse.
Standard Equipment includes:
MH-60, MH-6N, MH-6L
• Automatic tank fill and start
• Built-in electric booster heater (MH-60 only)
• Field convertible to corner model
• Electric tank heat
• Balanced three door lift system
• Low-water tank heat protection
• 1-hp drip-proof pump motor
• Door safety switch
Options (MH-60 only)
• Electric booster (70°F/39°C temperature
rise) heater for 110°F/43°C supply water
• Steam injector or steam coil tank heat
(steam booster 40°F/23°C-70°F/39°C rise)
Accessories
6
• Common utility connections
• Two dish racks (peg and flat bottom)
• Detergent/chemical connection provisions
• Stainless steel front and side panels
• 60-second time cycle
• 1-1/2" O.D. gravity drain connection
• Water pressure reducing valve (MH-60 only)
• Interchangeable upper and lower spray arms
Additional dishracks:
Dish rack (peg) P/N 101285
Silverware rack (flat bottom) P/N 101273
3/4" Pressure reducing valve (PRV) P/N 112387