CLEANING
19
Deliming
Your dishwasher should be delimed regularly depending on the mineral content of your
water. Inspect the machine interior for mineral deposits and use a deliming solution for the
best cleaning results.
NOTE:
Consult your chemical supplier for an appropriate deliming solution.
WARNING:
Deliming solutions or other acids must not come in contact with household
bleach (sodium hypochlorite) or any chemicals containing chlorine, iodine,
bromine, or fluorine.
Mixing will cause hazardous gases to form.
Skin contact with deliming solutions can cause severe irritation and possible
chemical burns. Consult your chemical supplier for specific safety precautions.
Deliming Process
Model MH-60 and MH-6N
1. Remove all dishes from machine.
2. Remove any chemical pick-up tubes from their containers.
3. Place each tube in a container of fresh water and prime the chemical lines for several
minutes to thoroughly flush chemical from the lines. Leave pick-up tubes out of their
containers.
4. Drain the machine and refill with fresh water.
5. Spray interior walls with delimimg solution and let sit for 5 or 10 minutes depending on
amount of build-up. Add deliming solution to wash tank.
Do not let chemicals sit for longer than 15 minutes.
6. Close the doors to run an automatic cycle.
7. Repeat Steps 4-6 if necessary.
8. Lift the drain lever assembly and drain the machine.
9. Refill the machine and run a complete cycle two additional times. Drain and refill the
machine after each cycle to thoroughly flush any deliming solution from the interior of
the machine.
10. Flip the power switch to OFF.
11. Drain machine.
12. Deliming is complete.
!