Mr. Coffee 7983-33 Coffeemaker User Manual


 
12
use
Brewing Coffee Now
1. After completing the steps in the “Adding Water
and Coffee” section and with the glass decanter
and the filter basket securely in place, turn the
coffeemaker on.
For Switch models, press “On” button and the
on light will come on.
For Programmable models: press the SELECT
button once to turn the coffeemaker on. The
BREW NOW green light will turn on to signal
that the coffeemaker is on and brewing. The
green regular strength light will come on to
show that you are brewing a regular strength
carafe of coffee. The Audible Ready Signal will
beep when the brew cycle is complete.
2. To enjoy a more full flavoured cup of coffee,
press the Brew Strength button once. The
STRONG Brew Strength red light will come
on. The coffeemaker will remain in the Brew
Strength you have selected until you change it
back to the regular strength by pressing the
Brew Strength button or until you unplug the
machine.
3. After the used coffee grounds have cooled,
carefully open the filter basket and discard
them.
NOTE: Shower head cover is hot after brew-
ing. Always allow the coffeemaker to cool
down before cleaning.
4. Prior to making a second pot of coffee, turn
the unit off. This will reset the FRESH BREW
timer feature. Switch models - Make sure you
turn the coffeemaker off and then back on
before brewing more coffee, otherwise the two-
hour auto shut-off time period will not be
restarted.