Filter
Top Products
use
14
Brewing Coffee Later
(DELAY BREW on 7984-33, 7985-33, 7988-33 only)
1. You must first set the time for when you would
like the coffeemaker to begin brewing your coffee
as described in “Setting the Clock and the Delay
Brew Timer” section.
2. Prepare your coffeemaker as described in “Adding
Water and Ground Coffee” section.
3. To activate DELAY BREW and program your cof-
feemaker to brew coffee at a later time, press the
SELECT button twice. The yellow DELAY BREW
light will illuminate. The coffeemaker is now set
to automatically brew coffee at the pre-set later
time. At this time the brew strength light will illu-
minate. You can select the strength that you desire
by pressing the BREW STRENGTH button.
4. At the pre-set time the green BREW NOW light
will go on and the DELAY BREW yellow light
will go off, indicating the brewing has started in
the selected brew strength. The FRESH BREW
™
timer feature will start.
5. The Audible Ready Signal will beep when the
brew cycle is complete. The coffeemaker warmer
plate will keep your coffee hot for 2 hours and
then will automatically turn off.
As a safety feature, your coffeemaker will NOT start
again automatically the next day. If you want your
coffee to brew at the same time the following day,
simply add a new filter, coffee and water and set
DELAY BREW, by repeating steps 2 and 3 above.
To cancel BREW:
Press the SELECT button. The DELAY BREW
yellow indicator light will go off.