NEC N230S Microwave Oven User Manual


 
66
The oven light is on when the microwave
oven is operating or the door is opened.
The oven door can be opened at any time
during operation by touching the door release
button on the control panel. The oven will
automatically shut off.
Each time a pad is touched, a BEEP will
sound to acknowledge the touch.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show ":0" when the oven is
plugged in.
Time clock returns to the present time when
the cooking time ends.
When the PAUSE/CLEAR pad is touched
during the operation, the oven stops cooking
and all information is retained.
To erase all information (except the present
time), touch the PAUSE/CLEAR pad once
more. If the oven door is opened during the
oven operation, all information is retained.
If the START pad is touched and the oven
does not operate, check the area between the
door and door seal for obstructions and make
sure the door is closed securely.
The oven will not start cooking until the door is
completely closed or the program has been
reset.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1. Plug power supply cord into 230V~240V, 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
1
2
3
4
5
6
7
8
Make sure the oven is properly installed
and plugged into the electrical outlet.
WATTAGE OUTPUT CHART
• The power-level is set by pressing the POWER LEVEL pad. The chart shows the display, the power
level and the percentage of power.
Touch POWER LEVEL pad Power Level (Display)
Approximate Percentage of Power
once P-HI 100%
twice P-90 90%
3 times P-80 80%
4 times P-70 70%
5 times P-60 60%
6 times P-50 50%
7 times P-40 40%
8 times P-30 30%
9 times P-20 20%
10 times P-10 10%
11 times P-00 0%