Filter
Top Products
EN
FR
TROUBLESHOOTING
No light on display.
➔ Check the mains, plug, voltage, and fuse. Press the ON button located behind the machine
display. In case of problems, call the Nespresso Club.
Machine too hot message, indicated in display
➔ In certain conditions, machine heater reaches high temperature, (ie. after an emptying of
the uid system). Simply wait, machine will cool down automatically.
Coee comes out very slowly.
➔ Flow speed depends on the coee variety.
➔ Descale if necessary; see Descaling section.
Coee is not ho t enough.
➔ Preheat cup.
➔ Descale if necessary; see Descaling section.
Capsule area is leaking (water in capsule container).
➔ Position capsule correctly. If leakages occur, call the Nespresso Club.
Irregular blinking.
➔ Send appliance to repair or call the Nespresso Club.
No coee, just water runs out (despite inserted capsule).
➔ In case of problems, call the Nespresso Club.
Lever cannot be closed completely.
➔ Empty capsule container. Make sure that no capsule is blocked inside the capsule
container.
Quality of milk froth is not up to standard.
➔ For a perfect milk froth, use skimmed or semi-skimmed milk at refrigerator temperature
(about 4° C/39.2° F).
➔ Rinse after each milk based preparation. Place a recipient under milk outlet, rotate the
milk regulator knob until «CLEAN» position.
➔ Every two days, disassemble the R.C.S. and clean all components in the upper level of a
dishwasher.
Machine needs repair message, indicated in display.
➔ Contact the Nespresso Club or Nespresso authorized representative for examination, repair
or adjustment.
18
6926_UM_LATTISSIMA_PREMIUM_Z1A.indb 18 13.11.13 09:56