Filter
Top Products
Nokia Intellisync Mobile Suite Linux Installation Guide 25
3 Initial Testing After Installation
Overview
After installing Nokia Intellisync Mobile Suite, test your system using the instructions in this
chapter.
! Verifying Web Site Availability
! Verifying Successful Authentication
After you complete these initial tests, the system is ready for user access.
Verifying Web Site Availability
The first test is to verify that the Web site is available. Users can use the Web site to log in,
configure their account settings, and install the device.
On the Nokia Intellisync Mobile Suite server, open a Web browser and type
http://<serveraddress>/admin. This step validates that the server is operational and the Web site
is available. If you receive an HTTP error, try the following solutions.
! Check the default Web site port and confirm the port is set to 80.
! Restart the server.
Troubleshooting Logon Issues
If the server does not recognize the account or password, then the logon fails. Make sure you
typed the correct user name (including the domain name) and password, and then try again.
If the user name and password are correct but you still cannot log on, ensure that all Nokia
Intellisync services are started. For instructions to start Nokia Intellisync services, refer to
“Starting and Stopping Services” on page 24.