Filter
Top Products
ENGLISH
11
STEP 6
The
CO
2
Rubber
Directional
Washer goes
back into the
Keg Coupler.
STEP 7
Connect the
CO
2
line from
the Double
Regulator
to the Keg
Coupler.
STEP 11
After the Tap Tower has been placed
on the KEGORATOR™ and the hose
line feeds through the bottom, attach
the wing nut to the Keg Coupler.
STEP 8
Place the Tap Tower on the
KEGORATOR™ and feed the
hose line through the hole in the
top of the KEGORATOR™.
STEP 9
Make sure the notches in the Tap
Tower fit into the holes in the top of the
KEGORATOR™. Tighten the Tap Tower
by twisting until it locks in place.
STEP 10
Place Coupler Washer (#3)
on top of the Keg Coupler.