OK International DX-200/215 Water Dispenser User Manual


 
3
If a piston is not used with the barrel, an inline filter (881-000-000) must be
installed on the receiver head to help prevent fluids from being sucked back
into the unit. Also do not overfill the barrel and to lay the barrel on its side
Do not smoke or use open flame when flammable materials are being dispensed
This equipment is for indoor use only
2 SYMBOL DEFINITIONS
Symbol Definition
Power On/Off
Cycle Mode
Timer
Vacuum
Pressure
3 SPECIFICATIONS
Size
152mm X 165mm X 178mm
(6” X 6.5” X 7.0”)
Weight 1.2 kg (2.6lbs)
Input Voltage 24VDC
Rated Power 10W
Air Input 100 psi (6.9 bars) Max.
Pollution Degree II
Installation Category I
Indoor Use Altitude up to 2,000m (6,562ft)
Operating Temperature 0˚C to 50˚C (32˚F to 122˚F)
Storage Temperature -10˚C to 60˚C (14˚F to 140˚F)
Max. Relative Humidity
80% for temperature up to 31˚C (87.8˚F) Decreasing
linearly to 50% relative humility at 40˚C (104˚F)
Air Output 0-100 psi (0-6.9 bars)
Vacuum 406mm (16”) of Hg
Timer 0.020-99.999 seconds
Cycle Mode Manual, Timed
Timing Repeat Tolerance +/- 0.001%
Cycle Rate 600 cycles/min
LCD 16 X 2 display segments
4
4 FEATURES
Items Description
1
Power Button
2
Mode Button
3
Set up/Save Button
4
Display
5
Air Pressure Gauge
6
Air Pressure Regulator
7
Pulsed Air Outlet
8
Vacuum Control
9
Receiver head air hose holder
10
Foot Switch Receptacle
11
Power Receptacle
12
I/O Connection
13
Accessory Air Outlet
14
Exhaust Port
15
Air Inlet
16
Cord Lock
Figure 1.0
8
1
3
2
5
4
15
16
10
12
14
11
9
6
7