Omega Engineering 30 Slow Cooker User Manual


 
12
The keys
The End, Finish or Exit key
The “End” or “Finish” key is used to finish
editing programs or to exit a program. It is
also used to exit a sequence of key
operations.
The Up arrow key
The “Up arrow” key is used for scrolling up
through the lines on the screen. It is also
used to increase certain fields when editing.
The Down arrow key
The “Down arrow” key is used for scrolling
down through the lines on the screen. It is
also used to decrease certain fields when
editing.
The Decimal Point and Insert key
The “Decimal Point” key is used when
editing numeric fields. It is also used as an
Insert key during program editing to insert
additional steps and other field sets.
The Delete key
The “Delete” key is used during program
editing to delete steps and stages.
The Pause key
The “Pause” key is used during program
editing to insert a pause after a stage or to
insert increment and decrement times and
temperatures. It is also used to pause a
program when it is running.
The Enter or Accept key
The “Enter” key is used to enter an
operation or the edit mode. It is also used to
‘Accept’ a field or program change.
The End, Finish or Exit key
The “End” or “Finish” key is used to finish
editing programs or to exit a program. It is
also used to exit a sequence of key
operations.
The Up arrow key
The “Up arrow” key is used for scrolling up
through the lines on the screen. It is also
used to increase certain fields when editing.