Omega Engineering 30 Slow Cooker User Manual


 
27
To run a program
When the unit is switched on the display
will show this screen.
If known, type in the ‘Speed dial’ number
for the required program and press
“Enter” This will take you directly to the
required program.
If you do not know the ‘Speed dial’
number, press “Enter” to access the
list of stored programs.
Next either:
1. Scroll down to the required program
using the “Up Arrow” and “Down
Arrow” keys.
2. Or type the first letter of the program
name in the “New program” field; this
will then list all the program names
beginning with that letter. Use the “Up
Arrow” and “Down Arrow” keys
to select the required program.
Press “Enter” to accept
For example ‘Donna’.
To run the program, select ‘Run program’
and press "Enter"
A screen similar to this one will appear.
Press “Enter” to start the run.
Programs [0]
Information
Configuration
[ , to select ]
Methods [0]
Information
Configuration
[ , to select ]
Programs [7]
Information
Configuration
[ , to select ]
Methods [7]
Information
Configuration
[ , to select ]
* * New program ** []
2 STEP TEMPLATE 501
3 STEP TEMPLATE 502
[ , to select ]
* * New Methods *
*
[]
2 STEP 2
3 STEP 3
[ , to select ]
DONNA [7]
Run Program
View Program
[ , to select ]
DONNA [7]
Run method
View method
[ , to select ]
DONNA [7]
[ , to select ]
DONNA
[ RUN PROGRAM ? ]
[ Yes or No ]
DONNA
[ RUN METHOD ? ]
[ Yes or No ]