Filter
Top Products
12
1. Rotate the Cover to the left until the
“tab” is unseated.
2. Remove the Blade by pulling upward.
(If the blade is held in place by
ingredients, it may be removed with
the Work Bowl)
3. Rotate the Main Handle to the left
until it is unseated and lift off of the
motor housing.
1. Place the large work bowl onto the
motor housing with the main handle
to the left of the power panel. This
aligns the bowl to properly engage
the safety interlock. Turn the main
handle to the right until it “clicks”
or “locks” into place. The main
handle should now be centered
with the Power Panel.
2. Place the Large Blade or Dough Blade
onto the main motor shaft. You may
have to rotate the blade partially to
properly “seat” onto the shaft.
3. Place the Work Bowl Cover onto the
Work Bowl with the interlock “tab”
to the left of the main handle. Turn
the Cover to the right until it “clicks”
or “locks” into place. The “tab” should
now be aligned with the Main Handle.
DISASSEMBLY – LARGE BLADE OR DOUGH BLADE
1.
2.
3.