Filter
Top Products
7
USING THE WATER DISPENSER
If you can see the clock showing on the display, the water dispenser is on. If the Clock is not showing, press the
ON / OFF button once to turn the water dispenser on.
• Press the HOT button to turn the heating function on. The current temperature will be displayed and the water
dispenser will start to heat up the water to the set temperature. Once the set temperature is reached, three
things happen. One, the heating icon to the left of the hot water temperature display will become solid. Two, the
water dispenser will go into warm keeping mode in order to conserve electricity. Three, the dispenser will beep
3 times (if SILENT mode is off) to let you know that the set temperature has been reached. If the temperature
reaches 5°C below the set temperature, the water dispenser will start the heating process again until the set
temperature is reached. Press the HOT button again to turn of the heating function. The amber temperature
display will disappear from the display.
• Press the COLD button to turn the cooling function on. The current temperature will be displayed and the water
dispenser will start to cool the water to the set temperature. Once the set temperature is reached, three things
happen. One, the cooling icon to the right of the cold water temperature display will become solid. Two, the
water dispenser will go into temperature maintenance mode in order to conserve electricity. Three, the
dispenser will beep 3 times (if SILENT mode is off) to let you know that the set temperature has been reached.
If the temperature reaches 5°C above the set temperature, the water dispenser will start the cooling process
again until the set temperature is reached. Press the COLD button again to turn of the cooling function. The
blue temperature display will disappear from the display.
• If you want to change temperature read-out to Celsius or Fahrenheit, press the
°C / °F button as required.
Allow 40 minutes for water to reach hot and cold temperatures
USING THE REFRIGERATED COMPARTMENT
IMPORTANT: Prior to using the refrigerated
compartment for the first time, clean the compartment with a wet cloth and dry thoroughly.
Place a sponge at the bottom of the compartment and close the door tight.
• After turning the cooling function on, wait 2 hours before placing any food or drinks in the refrigerated
compartment.
• Always leave some space in between the items in the refrigerated compartment in order for the air to circulate
properly
• Periodically, remove the sponge from the compartment and squeeze it to remove excess moisture. Put it back
into the compartment after removing the excess moisture.
Note that the default temperature inside the refrigerated compartment is 4°C.
SPECIFICATIONS
Capacity: 3 or 5 Gallon Water Bottle
Chilling Rate: Approx. 2 liters per hour
Heating Rate: Approx. 5 liters per hour
Power Consumption:
Cooling - 100W
Heating - 500W