Filter
Top Products
4
FIGURE 1 FIGURE 2 FIGURE 3
USING YOUR BLENDER
1. Clean blender according to the instructions in the “Cleaning and Storing
Your Blender” section.
2. Turn jar upside down so the small opening is at the top. (Figure 1)
3. Place sealing ring over jar opening. (Figure 2)
4. Place blade into jar. (Figure 3)
5. Place threaded bottom cap over blade and turn clockwise to tighten. (Figure 4)
6. Place jar assembly onto base. (Figure 5)
7. Place ingredients into jar.
8. Place lid with feeder cap on jar.
9. Plug the power cord into a 120 Volt AC electrical outlet.
FIGURE 4
FIGURE 5
4246-ClassicBlender_IB-REV.qxd:0022738/CubeSlopeBlender 11/9/09 11:57 AM Page 4