Filter
Top Products
C
ARE AND
C
LEANING
WARNING: Always turn control to OFF then disconnect plug from wall outlet
BEFORE disconnecting BREAK-AWAY CORD.
CAUTION:
• Do not immerse cord sets in water or any liquids
• Do not attempt to defeat the detachable magnetic SureRELEASE
™
Cord system
by trying to permanently attach cord set to product.
• Do not stick pins or other sharp objects in holes on magnetic cord set.
• Do not use any type of steel wool to clean magnetic contacts.
NOTE: Make sure fryer has cooled before cleaning.
• Turn unit OFF.
• Unplug from outlet and allow unit to cool completely.
• Remove SureRELEASE™ magnetic cord from the fryer socket.
• Remove the Lid.
• Open the Filter Cover and remove the Filters.
• Remove Frying Basket.
• Lift Control Panel Assembly up from the front of the fryer.
• Carefully lift Oil Reservoir straight up out of the Housing by holding the rim
of the bowl. The built-in oil pour spout allows you to better drain the oil into your
storage container. Store oil in an airtight container. See Hints for Best Results.
Oil Reservoir is also Dishwasher Safe.
WARNING: Do not remove Oil Reservoir until the unit has cooled completely
and is unplugged.
• Remove Power Strip from the interior of the back of the fryer. (please note that the
control panel assembly must be removed first before the power strip can be removed).
• Remove Condensation Trap from the back of the fryer.
NOTE: This trap will collect any water that has been condensed on the inside of the
Lid when the Lid is opened after frying. Remember to empty and clean the
Condensation Trap after each use.
• The Frying Basket, Lid, Oil Reservoir, Housing and Condensation Trap are
dishwasher safe. Dry all parts thoroughly after cleaning.
• The Control Panel Assembly and Power Strip should never be immersed in water or
other liquids. Gently clean the outer surface of the Control Panel Assembly with a
damp cloth containing mild soap solution or plain water, and dry thoroughly.
• Ensure that both the Lid and Oil Reservoir are completely dry after washing and
before use.
• Insert the Power Strip back into the fryer Housing.
• Insert Oil Reservoir back into Housing.
• Insert Control Panel into front of the unit.
• Place Frying Basket into bowl.
• Put Filters back into Lid and put Cover on.
• Replace and close Lid.