Filter
Top Products
To alter the power level during cooking, there is no need to stop microwave operation.
To do this:
1. Press the Power Selector switch
2. Select the new power by using the Time and Power setting keys.
3. The microwaves will continue, cooking at the new power set.
To cook in sequences or different stages in the same operation.
This microwave oven accepts the programming of cooking divided into sequences or different stages within the
same operation.
As an example:
For preparation which requires total cooking divided into two stages each with different time and power, in the first
stage 4 minutes at maximum power and second stage 3 minutes at minimum power.
To do this:
1. Perform all the steps of the time and power programming for the first stage, in our case 4 minutes at maximum
power.
2. Then program time and power for the second stage, in our case 3 minutes at minimum power.
3. Press the START push-button, to start the cooking.
Note: to carry out cooking in sequences, repeat the time and power programming a maximum of 4 times.
1.
2.
3.
4.
5.
1. Remove the food from the oven.
2. Close the microwave oven door.
3. Press the Cancel push-button.
To interupt cooking if you wish to check, stir or turn the food:
Open the microwave door - the cooking will stop.
When the microwave door is opened the cooking time and function selected
remain set.
Check, stir or turn the food.
Close the oven door.
Press the START push-button, to start cooking again.
The cooking continues from where it was interrupted.
At the end of cooking an acoustic signal is heard
If you do NOT want to continue cooking.
7
OPERATION