Filter
Top Products
- 17 -
How to Operate
G. PROGRAM LIST
PAD INSTRUCTION
DIGITAL DISPLAY WINDOW
1
Open the door and leave it open.
The oven lamp will turn on and “0” will appear.
2
While pressing Start pad, press Number/Memory pad “1”.
All currently programmed information (the program set into each
Number/Memory pad (000 to 999), Beep Tone, Program Lock, Oven
Lamp settings when the door is open, Oven Lamp blink settings at the
end of heating cycle and Oven Lamp reduction settings during cooking
information) will continuously appear.
Note: When the filter cleaning alarm counter is set, this appears after
Program Lock.
e.g.
How to erase memory content
Open the door (keep it open) and press Prog pad.1.
Select the memory number you want to erase, and press the Power Level Selector pad.2.
Press the Stop/Reset pad, and “0” is displayed to indicate that memory is erased. 3.
*Memory content is automatically erased if overwritten.