English
- Eng-3 -
Feature Diagram
Door Safety Lock System
Control Panel
Identification Plate Warning Label
Power Supply
Cord
Power Supply
Cord Label
Oven Air Vent
Door Release Button
Push to open the door. Opening the door during
cooking will stop the cooking process without
cancelling the program. Cook resumes as soon as
the door is closed and Start Pad is pressed. The
oven light will turn on and stay on whenever the
door is opened. It is quite safe to open the door
at any time during a cooking program and there is
no risk of Microwave exposure.
Wire Rack
(a) A Wire Rack is included with the oven in order to facilitate browning of small dishes.
(b) Wire Rack should be cleaned regularly.
(c) When using Wire Rack in the manual GRILL or COMBINATION cooking modes, be
careful to choose heat-proof containers; containers made of plastic or paper may melt or
burn when exposed to the heat radiating from the grill.
(d) When using the COMBINATION mode, never place any aluminum or metal container
directly on Wire Rack. Always insert a glass plate or dish between Wire Rack and the
aluminum container. This will prevent sparking that may damage the oven.
(e) It is not recommended to use Wire Rack when cooking in the MICROWAVE mode only.
Oven Window
Flat Table
1. If the flat table is hot, allow cooling down before cleaning.
2. Do not cook directly on the flat table. Always put the food in the container or rack.
NOTE:
The above illustration is for reference only.
Oven Air Vent
Oven Air Vent
Door Safety Lock System
IP2659_39L40KP_Eng_32_091009.indd 3IP2659_39L40KP_Eng_32_091009.indd 3 2009-10-9 9:47:152009-10-9 9:47:15