Filter
Top Products
Operation & Hints
Control Panel
– 7 –
Beep Sound
When a pad is pressed correctly, a beep will be heard. If a pad is pressed and no beep is heard, the unit did not
or could not accept the instruction. The oven will beep twice between programmed stages. At the end of any
completed program, the oven will beep 5 times.
NN-MX26
NN-MX21
(1)
(3)
(5)
(6)
(4)
(1)
(2)
(7)
(8)
(2)
(1) Display Window
(2) Auto Cook Pads
(3) Micro Power Pad
(4) Time Pads
(5) Timer/Clock Pad
(6) Turbo Defrost Pad
(7) Start Pad
One tap allows oven to begin functioning. If door is
opened or
Stop/Reset Pad is pressed once during
oven operation, Start Pad must again be pressed to
restart oven.
(8) Stop/Reset Pad
Before cooking: One tap clears your instructions.
During cooking: One tap temporarily stops the
cooking process. Another tap cancels all your
instructions and time of day appears in the Display
Window.
(1) Timer/Weight Select Dial
(2) Micro Power Select Dial
NOTE:
As soon as the TIMER/WEIGHT SELECT DIAL is turned,
the oven will start cooking the food.
ALWAYS RETURN TIMER/WEIGHT SELECT DIAL
BACK TO ZERO position if food is removed from oven
before set cooking time is complete and when oven is not
in use.
TO STOP OVEN when a cooking program is set, open
the door, microwaves automatically stop entering the
oven cavity because of the safety door lock system. If the
remaining cooking time is not required, turn the
Timer/Weight Select Dial back to zero position before
closing the door.