Filter
Top Products
Aluminium based saucepans can leave shiny metal marks on the
pan supports. Clean the pan supports regularly to remove the marks
using a mild abrasive like 'Cif' with a soft scourer. For more stubborn
marks you can use a soap filled pad such as 'Brillo'.
After cleaning the appliance parts, dry
them thoroughly before you put them back.
When replacing hotplate burner parts
1. Crown to body (Do not try to force the
crown onto the body). Make sure that the
hole in the crown is centrally over the
electrode. Check that the two longer
location pegs sit in the slots in the body.
When the crown is in this position let it fall
freely on to the body.
Check that the crown can be moved
slightly from side to side.
2. Cap to crown. Place cap centrally on the
top of crown (enamel side up). Move
sideways and front to back to check the
cap is fitted properly.
3. Check for ignition.
If a burner will not light then you need to check the crown and cap
positions.
The grill
Do not clean the grill burner itself.
The burner is designed to be self cleaning. Cleaning the grill may cause
the holes in the burner to become blocked preventing it from operating
correctly.
Please note that due to the nature of stainless steel the grill burner may
tarnish through use over a period of time. This is quite normal and is not
a fault on the appliance.
Clean the area around the grill frequently
using hot soapy water.
After use you can soak the pan for a few
minutes and then clean it using mild
abrasives or a soap filled pad such as
'Brillo'.
Clean the grill shelf using hot soapy water. Mild abrasives can be used
if necessary.
L Y R I C 5 0 g s
21
Care and cleaning