Philips HD4685 Hot Beverage Maker User Manual


 
Thelightoftheselectedtemperaturelightsup.
Note: If you cannot set the desired temperature, the current temperature of
the water in the kettle is higher than the temperature you want to set. The
current temperature is shown by the number of lights that are on.
3 Presstheon/offbuttontoswitchontheappliance(Fig.6).
Note: If you do not press the on/off button within 10 seconds after setting
the temperature, the set temperature is lost.
Whilethewaterheatsup,thecurrenttemperatureisshownbythe
numberoflightsthatareonandthelightofthesettemperature
ashes.(Fig.11)
Whenthekettlehasreachedthesettemperature,youhearan
audiblesignal(onebeep)andthekettleswitchesoffautomatically.
Thelightringaroundtheon/offbuttongoesoff.
Thelightofthesettemperaturestaysonfor120secondstolet
youknowthewaterhasjustreachedthepresettemperature.
Youcanadjustthesettemperaturewhilethekettleisoperating.Thisis
onlypossibleifthetemperatureofthewaterisstillbelowthenewlyset
temperature.
Note: If you remove the kettle from the base, the set temperature is lost.
Keeping water warm
Youcanusethekeep-warmfunctiontokeepwaterwarmata
temperatureof100°,80°,60°Cor40°C.
Therearetwowaystokeepwaterwarm:atthecurrenttemperature,or
atatemperaturehigherthanthecurrenttemperature.
Onlyusethekeep-warmfunctionwhenthereisatleast0.5lwaterin
the kettle. If there is too little water in the kettle, the kettle may switch
offwithin30minutestoprotecttheheatingelement.
1 Selectakeep-warmmethod.
,
,
,
,
ENGLISH10