Filter
Top Products
7
4.3 Flushing the appliance
You need to ush the coffeemaker once before
rst use.
1 Open the water reservoir lid. Fill the water
reservoir with fresh cold water up to the
8-cup indication. (Fig. 6)
D
Note:
Do not put coffee beans or ground coffee in
the appliance.
2 Close the water reservoir lid.
3 Put the jug in the appliance (Fig. 7).
4 Press the on/off button (Fig. 8).
• The display lights up.
5 Press the strength select button (Fig. 9).
6 Turn the knob to choose the pre-ground
coffee setting (Fig. 10).
• The pre-ground coffee icon lights up.
7 Press in the centre of the knob to conrm.
Then press in the centre of the knob again to
start the ushing process (Fig. 11).
8 Let the appliance operate until the ushing
process has been completed.
9 Empty the jug.
5 Using the appliance
5.1 Filling the water reservoir
1 Open the water reservoir lid and ll the water
reservoir with the required amount of cold
water. (Fig. 6)
When you open the water reservoir lid, there
are indications for 2 to 10 cups on the inside
of the appliance. You can use these indications
to determine how much water to put in the
water reservoir. The reection changes from
light to dark per lled cup of water. You can
also use the water level indicator on the jug.
D
Note:
Do not ll the water reservoir beyond
the 10-cup indication.
4 Beforerstuse
4.1 Setting the clock
1 Put the mains plug in the wall socket.
• 00:00 ashes on the display to indicate that
you have to set the clock time.
2 Turn the knob to set the hour (Fig. 2).
3 Press in the centre of the knob to conrm
the hour (Fig. 3).
• The minutes start to ash to indicate that
you have to set the minutes.
4 Turn the knob to set the minutes (Fig. 4).
5 Press in the centre of the knob to conrm
the minutes (Fig. 5).
6 The display shows the set clock time. The
coffeemaker is ready for use.
4.2 Setting the automatic
switch off time
You can adjust the time after which the appliance
automatically switches off. The default time is set to
30 minutes. You can adjust this time to a maximum
of 120 minutes. If you want to adjust the automatic
switch off time, follow the steps below.
1 Make sure the appliance is switched off
(but the mains plug is in the wall socket).
2 Press and hold in the centre of the knob until
the display starts to ash.
3 Turn the knob to increase or decrease the
time. 1 is 10 minutes, 2 is 20 minutes, 3 is
30 minutes and so on until 12 is 120 minutes.
4 Press in the centre of the knob to conrm the
minutes.
D
Note:
The appliance always saves the last setting.
ENGLISH