Filter
Top Products
22
ENGLISH
Adjusting the co ee length
The machine allows you to adjust the amount of brewed co ee or milk
according to your taste and the size of your cups.
Each time one of the buttons “
”, “ ” and “ ” is pressed, the machi-
ne brews a pre-set amount of product. Each button may be individually
programmed for a speci c brew setting.
The following procedure describes the programming of the “
” button.
1
Place a cup under the dispensing spout.
3
When the “STOP” icon is displayed, press the “ESC” button as soon as
the desired amount of co ee is reached.
Now the button “
” is programmed; each time it is pressed, the machine
will brew the same amount of espresso that was just programmed.
Note:
To program the “
”, “ ” and “ ” buttons, the same steps should be
followed.
You should always use the “ESC” button to stop brewing co ee when the
desired amount of co ee is reached.
You can also adjust the beverage length through the “BEVERAGE MENU”
(see the Beverage Programming chapter, Co ee Length option).
ESPRESSO
MEMO
ESPRESSO
MEMO
STOP
2
Press and hold the “ ” button until the “MEMO” icon is displayed.
Then release the button. The machine is now programming.
The machine starts brewing co ee.