Filter
Top Products
62
ENGLISH
4
Remove the water tank, and if installed, remove the INTENZA+ water
lter. Pour the entire content of the Saeco decalci er.
Then ll the water tank with fresh water up to the MAX level. Press the
“OK”
button.
5
Empty the (internal) / (external) drip tray. Press the “OK” button.
6
Fill half the milk carafe with fresh water. Insert the carafe and open the
milk dispenser by turning it clockwise. Press the “OK” button.
7
Place a large container (1,5 lt) under the hot water/steam wand and
milk dispenser spout of the carafe. Press the “OK” button.
8
The machine will start dispensing the descaling solution at intervals.
The bar on the display shows the cycle progress.
Note:
To empty the container during the process, the descaling cycle may be
paused by pressing the “ESC” button. To resume the cycle, press the “OK”
button.
9
The message indicates the end of the rst step. The water tank needs
to be rinsed. Fill the water tank with fresh water up to the MAX level.
Press the “OK” button.
FILL TANK WITH
DESCALING SOLUTION
OK
EMPTY TRAY UNDER
BREW GROUP
OK
FILL HALF CARAFE
WITH WATER. INSERT
IN BREW. POSITION
OK
PLACE A CONTAINER
UNDER HOT WATER &
CARAFE DISP SPOUT
OK
RINSE TANK &
FILL WITH WATER
OK
PAUSE
STEP 1/2 DESCALING