Filter
Top Products
Basic operation
When the base station is connected to a:
- analogue line output of an analogue stereo source
(stereo TV, stereo VCR, (S)VCD player, tape
recorder, etc.)
- digital electrical coaxial S/PDIF output of a stereo
source (CD player with S/PDIF output, etc.) or a
multichannel source (DVD player with S/PDIF
output, etc.)
1 Switch on your audio source.
2 Switch on the HP1500 base station: the power indicator will change from
red to green.
3 Select the input source you wish to listen to (analogue or digital):
– In case of analogue input source: you can select Dolby Prologic II;
activation of Dolby Headphone is optional.
– In case of digital input source: Dolby Digital or DTS will be activated
automatically, together with Dolby Headphone.
4 In case you activate Dolby Headphone you can toggle between the
3 modes and bypass mode.
5 In case you want to listen to a corded headphone:
–You can connect up to 2 corded headphones to the base station.
– Adjust the volume on the base station: this will have no effect on the
headphone.
– Adjust the bass as desired by pressing the DBE button on the base
station: this will have no effect on the headphone.
ENGLISH26
0912HP_EU 09-12-2003 12:12 Pagina 26