Filter
Top Products
Maintenance
• If the headphone will not be used for a longer time, please remove the
batteries to prevent leakage and corrosion.
• Hearing Safety! Continuous use at a high volume may permanently
damage your hearing.
• Do not leave the headphone near heat sources. Do not expose to
direct sunlight, excessive dust, moisture, rain or any kind of mechanical
shock.
• Do not use alcohol, thinner or petroleum-based substances to clean the
headphone or transmitter. Use a slightly dampened chamois cloth to
clean the housing.
• Do not use cleaning agents containing alcohol, spirits, ammonia or
abrasives as these may harm the housing.
Technical specifications*
Input sensitivity: 500 mVrms (1 kHz sine wave)
Power supply – base station: SBC HP 1500/00 & /05
230 VAC 50Hz
Signal/Noise ratio: 85 dB typical
(1 kHz sine wave, A-weighted)
HP 1000 Headphone
Distortion: 0.8% THP typical
Sensitivity: 106 dB
Frequency range: 40 – 40,000 Hz
Impedance: 32 Ohm
Headphone cable: 4.0 m (12 ft) LC OFC
Max. power input: 1500 mW
*) All specifications are subject to change without prior notice.
ENGLISH28
0912HP_EU 09-12-2003 12:12 Pagina 28