Philips SCF280 Food Processor User Manual


 
H Measuring cup
I Base with heating element
J Indicator LED
K Cord storage brackets
L Cap
M Cover
N Cover handle
O Steaming bowl
P Base with heating element
Preparing for use
1
Place the Nutrition Centre on a dry, stable, level and horizontal surface out of the reach of
children.
2 Unwind the required length of mains cord from the cord storage brackets in the base.
3 Insert the mains plug into the wall socket.
The indicator LED starts to burn green.
The Nutrition Centre is now in standby mode. The appliance does not heat up until you press and
turn the control knob to select a setting.


Babies like their milk and food to be at a temperature of 37°C. The control knob enables you
to set the correct food temperature. The setting depends on the amount, consistency and
current temperature of the milk or food. (Fig. 2)
y refrigerator temperature (approx. 10°C.)
. room temperature (approx. 20°C.)
m bottle contents up to 200ml
, minimum bottle contents approx. 60ml
Note:If all the water has evaporated before the heating process is completed, the 3-in-1 Nutrition
Centre starts to beep and the indicator LED starts to blink red. If this happens, press the control knob to
interrupt the heating process and ll the water reservoir.
Heating
Heating baby bottles
1 Pour 20ml water into the water reservoir with the measuring cup. (Fig. 3)
2 Remove the cap from the cover (1) and place the cover on the base (2). Place the bottle on
the protective grid in the base (3). (Fig. 4)
3 Look up the desired setting in the temperature overview.
The setting depends on the amount of milk in the bottle and the current bottle temperature.
4 Press (1) and turn (2) the control knob to the desired setting. (Fig. 5)
The indicator LED starts to burn red continuously and you hear a beep to indicate that the
heating process has started.
The heating process takes up to about 5 minutes, depending on the quantity and the
temperature of the milk.
When the milk has reached the right temperature, you hear three beeps. The indicator LED
blinks red three times and then turns green.
5 Take the bottle out of the appliance and unplug the appliance.
,
,
-
-
-
-
,
,
,
ENGLISH 7