Filter
Top Products
Chapter 2
2-28
RDRAM Over Voltage Jumper: J1
The jumper is used to set the RDRAM voltage for overcolcking purpose.
J1
3
1
3
1
Normal
1
1
(2.6V)
Over Voltage
(2.68V)
Over Voltage
(2.58V)
This motherboard is designed to support over voltage.
However, please make sure your components are able
to tolerate such abnormal setting while doing over
voltage. Any attempt to operate beyond product
specification is not recommended. We do not guarantee
the damages or risks caused by inadequate operation
or beyond product specifications.
.
WARNING!