Filter
Top Products
Chapter 3
3-18
ECP Mode Use DMA
The ECP mode has to use the DMA channel, so choose the onboard parallel
port with the ECP feature. After selecting it, the following message will appear:
“ECP Mode Use DMA.” At this time, the user can choose between DMA
channel 3 or 1.
PWRON After PWR-Fail
This setting specifies whether your system will reboot after a power failure or
interrupts occurs. Available settins are:
Off Leaves the computer in the power off state.
On Reboots the computer.
Former-Sts Restores the system to the status before power failure or
interrupt occurs.
Game Port Address
This setting disables or assigns an address for the onboard game/midi port.
Settings: Disabled, 201, 209.
Midi Port Address
This setting specifies the base I/O port address for the onboard midi port.
Settings: Disabled, 330, 300, 290.
Midi Port IRQ
This setting specifies which IRQ the midi port will use. Settings: 5, 10.
Power Status Led
This item sets how the system uses Power LED on the case to indicate the
suspend/sleep state. Settings are:
Single The Power LED blinks to indicate the suspend/sleep
state.
Dual The Power LED changes its color to indicate the sus-
pend/sleep state.