Filter
Top Products
AWARD
®
BIOS Setup
3-15
USB/USB2 Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals. Setting options: Enabled, Disabled.
USB Keyboard Support
Set to Enabled if your need to use an USB keyboard in the operating system
that does not support or have any USB driver installed, such as DOS and SCO
Unix.
USB Mouse Support
Set to Enabled if your need to use an USB mouse in the operating system that
does not support or have any USB driver installed, such as DOS and SCO Unix.
USB 2.0 Controller
Select Enabled if your system contains a Universal Serial Bus (USB) 2.0
controller and you have USB 2.0 peripherals. Setting options: Enabled,
Disabled.
Init Display First
This item specifies which VGA card is your primary graphics adapter. Settings:
PCI Slot and AGP.
AC’97 Audio
Auto allows the mainboard to detect whether an audio device is used. If the
device is detected, the onboard AC’97 (Audio Codec’97) controller will be
enabled; if not, it is disabled. Disable the controller if you want to use other
controller cards to connect an audio device. Settings: Auto, Disabled.
AC’97 Modem
Auto allows the mainboard to detect whether a modem is used. If a modem is
used, the onboard MC’97 (Modem Codec’97) controller will be enabled; if not,
it is disabled. Disable the controller if you want to use other controller cards to
connect to a modem. Settings: Auto, Disabled.
Onboard Sound (CMedia8738)
This setting enables/disables the onboard sound chip CMedia8738. The
onboard audio controller will be enabled if the device is detected. If you want
to use other controller cards to connect an audio device, diable the controller.
Settings: Auto, Disabled.