Filter
Top Products
LIGHTING
The canopy is fitted with three 20W halogen
spotlamps. If one of the spotlamps fails to
function check that the two pins are correctly
inserted into the lamp holder.
To replace a spotlamp remove the two
screws, which secure the lens retaining ring
and glass lens as illustrated. Take care to
ensure the lens and retaining ring are
supported while removing the screws. Extract
the spotlamp from the lamp holder by pulling
gently.
Replacement spotlamps are specified 230V
20W.
When replacing the spotlamps, make sure
that the two pins are correctly inserted in the
lamp holder, and then replace the glass lens
and retaining ring.
CLEANING
We recommend the chimney hood is cleaned
using a damp cloth wrung out in warm soapy
water using a mild liquid household cleaner.
Never use excessive amounts of
water when cleaning, in particular
around the control buttons.
Never use thinners or products
containing alcohol, as they will
damage the painted or bright metal
finish.
Never use abrasive cleaning
materials, or scouring pads in
particular when cleaning painted or
bright metal finish.
MAINTENANCE AND CLEANING
7