Filter
Top Products
18
Oven not coming on when turned on manually
Is the power on? Is the clock illuminated? If
not there may be something wrong with the
power supply. Is the cooker supply on at the
isolator switch? Is the clock fl ashing 0.00?
If so set it to the correct time of day. Has
the Timer been set to AUTO by mistake. If
AUTO is showing on the clock display, press
the ‘cook period’ button and reduce any set
cooking time showing to 0.00, with the (+)
and (-) buttons. Press the
button twice.
Is the key symbol (
) showing in the display?
See the Clock section of the instructions for
more information on the key lock feature of
the clock.
Oven not coming on when automatic cooking
Timer set correctly but oven knob left OFF by
mistake?
Is the key symbol (
) showing in the display?
See the Clock section of the instructions for
more information on the key lock feature of
the clock.
Oven temperature getting hotter as the cooker gets
older
If turning the knob down has not worked or
only worked for a short time then you may
need a new thermostat. This should be fi tted
by a service person.
The oven light is not working
The bulb has probably blown. You can buy a
replacement bulb (which is not covered under
the guarantee) from a good electrical shop.
Ask for an Edison screw fi tting 15w 230v
lamp, FOR OVENS. It must be a special bulb,
heat resistant to 300 °C.
Open the oven door and remove the
Handyrack (if fi tted) and oven shelves.
Turn off the power supply.
Unscrew the bulb cover by turning
anticlockwise. Unscrew the old bulb. Screw in
the new bulb, screw back the bulb cover. Turn
on the electricity supply and check that the
bulb now lights.
Current Operated Earth Leakage Breakers
Where the cooker installation is protected
by a 30 milliamp sensitivity residual current
device (RCD), the combined use of your
cooker and other domestic appliances may
occasionally cause nuisance tripping. In
these instances the cooker circuit may need
to be protected by fi tting 100mA device. This
work should be carried out by a qualifi ed
electrician.
If there is an installation problem and I don’t get my
original installer to come back to fi x it who pays?
You do. Service organisations will charge
for their call outs if they are correcting work
carried out by your original installer. It’s in
your interest to track down your original
installer.
What cleaning materials are recommended for the
cooker?
See the ‘Cleaning’ section for recommended
cleaning materials. We do not recommend
Mr. Muscle, as it contains chemicals that may
damage the surfaces of your cooker.